Rust Scat®
Rust Scat® - Polyurethane Int/Ext Enamel Coating Gloss Finish 31
This product is formulated to offer a high quality, durable gloss enamel finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.
Features
- Durable Rust-Preventative Coating
- Quick Drying
- Suitable for use as a DTM coating
- Alkyd Gloss Enamel
- Non-Chalking
- Tenacious Adhesion
- Interior/Exterior
Recommended For
A durable rust preventive coating for metal substrates in commercial, institutional, and residential applications. Not recommended for immersion service. Interior/Exterior.
Limitations
- Apply only when surface and air temperatures are between 7.2 °C (45 °F) and 35 °C (95 °F).
- Do not apply if rain is threatening or if the temperature is within 5 degrees of the dew point and falling.
- Not recommended for immersion service.
Rust Scat® - Polyurethane Interior/Exterior Alkyd Metal Primer 35
For industrial or commercial use on moderate to severe atmospheric service. Excellent wetting properties provide penetration and bonding on hand or power tool cleaned surfaces. They can be used as a shop coat primer to provide corrosion protection for extended exposure, even without top-coating.
Features
- Polyurethane Alkyd Metal Primer
- Rust Preventative Coating
- Superb Bonding
- Excellent Wetting Properties
- Interior/Exterior
Recommended For
For Interior/Exterior commercial and residential applications. For moderate to severe atmospheric service on ferrous metal in industrial or commercial applications. It can be used as a shop coat primer to provide corrosion protection for extended exposure without top-coating. Use on interior or exterior structural members, metal buildings, tanks, tools, barges, ships, etc. Do not use for immersion service.
Limitations
- Do not paint when the temperature is within 5 degrees of the dew point and do not apply if rain is expected within 12 hours.
- Not recommended for immersion service.
- Do not use on non-ferrous metals such as Aluminum or Galvanized.
Additional Product Information
Additional product information including sell sheet and SDS / TDS